Skip to main content

Usage Guide

Overview​

Snowplow Mini is, in essence, the Snowplow real time stack inside of a single image. It is an easily-deployable, single instance version of Snowplow that serves three use cases:

  1. Giving a Snowplow consumer (e.g. an analyst / data team / marketing team) a way to quickly understand what Snowplow "does" i.e. what you put it at one end and take out of the other
  2. Giving developers new to Snowplow an easy way to start with Snowplow and understand how the different pieces fit together
  3. Giving people running Snowplow a quick way to debug tracker updates

Jump to First Time Usage if it is your first time with a Mini.

Upgrading​

Until version 0.15.0, Snowplow data was loaded to Elasticsearch 6.x in the Mini. However, a licensing change in Elasticsearch prevented us from upgrading it to more recent versions. To make sure we stay up to date with important security fixes, we've decided to replace Elasticsearch with Opensearch. Also, Kibana is replaced with Opensearch Dashboards.

Opensearch is a fork of open source Elasticsearch 7.10. Therefore this change shouldn't affect Mini users much. To minimize the impact further, we've tried to make as minimal a change as possible. In Mini, you can still access Opensearch with the /elasticsearch endpoint and Opensearch Dashboards with the /kibana endpoint.

The only breaking change this migration would bring is the removal of mapping types. It means that you don't have to provide a mapping type in your search queries anymore when accessing your data in good or bad indices. For example, good events count can be found using the following endpoint in previous versions: /elasticsearch/good/good/_count. Starting with 0.15.0, it can be found using this endpoint: /elasticsearch/good/_count.

First time usage​

This section is dedicated to the steps that need performing when accessing the Snowplow Mini instance for the first time.

Connecting to the instance for the first time​

You can access the Snowplow Mini instance at the http://[public_dns]/home address. While accessing Snowplow Mini services, HTTP authentication is required. As a result, you will be prompted for credentials which are USERNAME_PLACEHOLDER and PASSWORD_PLACEHOLDER by default.

You should change these default credentials to something to your liking by going to the Control Plane tab (the last one) and fill the "Change username and password for basic http authentication" form towards the bottom.

Note that only alphanumeric passwords are supported.

You will then be prompted for those new credentials.

Changing the super API key for the local Iglu schema registry​

As as second step, you should change the super API key for the Iglu schema registry that is bundled with Snowplow Mini. This API key can be changed via the Control Plane tab.

Given that this API key must be a UUID v4, you will need to generate one by running uuidgen at the command line, or by using an online UUID generator like this one. Make a note of this UUID, you'll need it to upload your own event and context schemas to Snowplow Mini in the next subsection.

Generating a pair of read/write API keys for the local Iglu schema registry​

note

Mini 0.8.0 comes bundled with Iglu Server 0.6.1 which introduced a couple of changes regarding this section.

  • Swagger UI of Iglu Server is deprecated, however Iglu Server still serves at /iglu-server endpoint.
  • POST /api/auth/keygen no longer supports query parameter to provide vendor prefix. Use POST raw data request instead.

To add schemas to the Iglu repository bundled with Snowplow Mini, you have to create a dedicated pair of API keys. There are 2 options:

  • Use igluctl’s server keygen subcommand
  • Use any HTTP client e.g. cURL

Option 1​

First, download igluctl.

Following is a sample execution where com.acme is the vendor prefix for which we'll upload our schemas, mini-address is the URL of our mini and 53b4c441-84f7-467e-af4c-074ced53eb20 is an example super API key you would have created in the previous steps.

/path/to/igluctl server keygen --vendor-prefix com.acme mini-address/iglu-server 53b4c441-84f7-467e-af4c-074ced53eb20

Option 2​

You can also use cURL to interact with Iglu Server:

curl --location --request POST 'mini-address/iglu-server/api/auth/keygen' \
  --header 'apikey: 1b5d0459-3492-451c-aab1-7f74cbe12112' \
  --header 'Content-Type: application/json' \
  --data-raw '{"vendorPrefix":"com.acme"}'

should return a read key and a write key.

{
  "read":"bfa90866-ab14-4b92-b6ef-d421fd688b54",
  "write":"6175aa41-d3a7-4e4f-9fb4-3a170f3c6c16"
}

Copying your Iglu repository to Snowplow Mini (optional)​

To test and send non-standard Snowplow events such as your own custom-contexts and unstructured events you can load them into the Iglu repository local to the Snowplow Mini instance.

  1. Get a local copy of your Iglu repository which contains your schemas. This should be modelled after this folder

  2. Download igluctl.

  3. Run the executable with the following input:

  • The address of the Iglu repository: http://[public_dns]/iglu-server
  • The Super API Key you created previously
  • The path to your schemas For example to load the iglu-central repository into Iglu Server:
/path/to/igluctl static push iglu-central/schemas http://[public_dns]/iglu-server 980ae3ab-3aba-4ffe-a3c2-3b2e24e2ffce --public

Note: this example assumes the iglu-central repository has been cloned in the same directory as where executable is run.

  1. After uploading the schemas, you will need to clear the cache with the restart button under the Control Plane tab in the Snowplow Mini dashboard.

Setting up HTTPS (optional)​

If you want to use HTTPS to connect to Snowplow Mini, you need to submit a domain name via the Control Plane. Make sure that the domain name you submit is redirected to the IP of the server Snowplow Mini is running from.

Sending events to Snowplow Mini​

Now that the first time usage steps have been dealt with, you can send some events!

Example events​

An easy way to quickly send a few test events is to use our example web page.

  1. Open up the Snowplow Mini UI at: http://[public_dns]/home
  2. Login with username and password which you choose in step 2.1
  3. Select the Example Events tab
  4. Press the event triggering buttons on the page!

Events from tracker​

You can instrument any other Snowplow tracker by specifying the collector URL as the public DNS of the Snowplow Mini instance.

Accessing the Opensearch API​

Snowplow Mini makes the Opensearch (or previously Elasticsearch) HTTP API available at http://[public_dns]/elasticsearch, you can check it's working by:

  • Checking the Opensearch API is available:
    • curl --user username:password http://[public_dns]/elasticsearch
    • You should see a 200 OK response
  • Checking the number of good events we sent in step 3:
    • curl --user username:password http://[public_dns]/elasticsearch/good/_count
    • You should see the appropriate count of sent events

Viewing the data in Opensearch Dashboards​

Data sent to Snowplow Mini will be processed and loaded into Opensearch in real time. In turn, it will be made available in Opensearch Dashboards. To view the data in Opensearch Dashboards, navigate in your browser to mini-public-address/kibana.

Index patterns​

Snowplow Mini comes with two index patterns:

  • good : For good events, indexed on collector_tstamp
  • bad : For bad events, indexed in data.failure.timestamp

Discover your data​

Browse to mini-public-address/kibana , once Opensearch Dashboards is loaded, you should be able to view most recently sent good events via the discover interface:

You can then inspect any individual event data in the UI by unfolding a payload:

If you want to inspect bad events, click on good, placed towards top left of the screen and select bad from drop-down list.

Unfold any payload to inspect a bad event in detail.

Resetting Opensearch indices​

As of 0.13.0, it is possible to reset Opensearch (or previously Elasticsearch) indices, along with the corresponding index patterns in Opensearch Dashboards, through Control Plane API.

curl -L \
-X POST '<mini-address>/control-plane/reset-service' \
-u '<username>:<password>' \
-H 'Content-Type: application/x-www-form-urlencoded' \
--data-urlencode 'service_name=elasticsearch'

Note that resetting deletes not only indices and patterns but also all events stored so far.

Restart services individually​

As of 0.13.0, it is possible to restart services one by one.

curl -L \
-X PUT '<mini-address>/control-plane/restart-service' \
-u '<username>:<password>' \
-H 'Content-Type: application/x-www-form-urlencoded' \
--data-urlencode 'service_name=<service_name>'

where service_name can be one of the following: collector, enrich, esLoaderGood, esLoaderBad, iglu, kibana, elasticsearch.

Configuring telemetry​

See our telemetry principles for more information on telemetry.

HTTP GET to get current configuration

curl -L -X GET '<mini-address>/control-plane/telemetry' -u '<username>:<password>'

HTTP PUT to set it (use true or false as value of key disable to turn it on or off)

curl -L -X PUT '<mini-address>/control-plane/telemetry' -u '<username>:<password>' -H 'Content-Type: application/x-www-form-urlencoded' --data-urlencode 'disable=false'

Uploading custom enrichments​

You can add new custom enrichments via the Control Plane tab. The only thing you have to do is submit the enrichment configuration file which you created according to the documentation in Available Enrichments. If the enrichment relies on additional schemas these should be uploaded to the Iglu repository.

Adding a custom schema​

Since Mini 0.8.0 deprecated Swagger UI of Iglu Server, we have 2 options:

  • Use igluctl’s static push subcommand to put our custom schema into the Iglu Server
  • Use any HTTP client e.g. cURL

Option 1​

First, download igluctl.

Following is a sample execution where path-to-schema(s) is the path to custom schema(s) , mini-address is the URL of our mini and 53b4c441-84f7-467e-af4c-074ced53eb20 is an example super API key you would have created in the previous steps.

/path/to/igluctl static push path-to-schema(s) mini-address/iglu-server 53b4c441-84f7-467e-af4c-074ced53eb20

Option 2​

You can also use cURL to interact with Iglu Server:

curl mini-address/iglu-server/api/schemas -X POST \
  -H "apikey: YOUR_APIKEY" -d '{"json": YOUR_JSON}'

The command will produce a response like this one, if no errors are encountered:

{
  "message": "Schema created",
  "updated": false,
  "location": "iglu:com.acme/ad_click/jsonschema/1-0-0",
  "status":201
}

Adding an external Iglu repository​

If you already have an external Iglu repository available, instead of copying it inside the Iglu repository bundled with the Snowplow Mini instance as shown in 2.4, you can add it directly with the Control Plane's Add an external Iglu repository form. Note that if you're using a static repository hosted on S3, you can omit providing an API key.

Runtime metrics​

Mini 0.12.0 introduced /metrics endpoint powered by cAdvisor . You can also find the link to metrics on the home page under Quicklinks header.

It's been possible to observe runtime metrics of a Mini instance by looking at AWS/GCP monitoring dashboards however internal services' individual metrics weren't exposed, making it more difficult to diagnose issues.

Exposing runtime metrics such as CPU, RAM and Network usage of the internal services in real time will make Mini more transparent, hopefully making it easier to understand what's going on under the hood.

Logs​

As of Mini 0.12.0, application logs of the Mini sub-services are exported to Cloudwatch on AWS and Cloud Logging on GCP.

On AWS, each individual service emits its' logs under a specific log stream within snowplow-mini log group.

On GCP, we need to make use of filters to see the logs of a specific component. The recommended approach is as following:

  • On GCP console, go to Logging > Logs Viewer
  • Under Query Builder, select resource
  • Under VM instance, select the instance Mini is running at
  • Click on Add

Click on Run Query and we should see logs of all services combined.

To see the logs of a specific component, add the following filter to the query:

jsonPayload.container.name="/service-name"

where service-name can be one of the following: elasticsearch, kibana, elasticsearch-loader-good, elasticsearch-loader-bad, nsqlookupd, nsqd, nsqadmin, scala-stream-collector-nsq, stream-enrich-nsq

An example query looks as following:

resource.type="gce_instance"

resource.labels.instance_id="3778299199368430127"

jsonPayload.container.name="/elasticsearch"

Was this page helpful?